Circutor CVMk2 Series Manuale Utente Scaricare il pdf (Pagina 44)

CVM

CONFIGURATION

WARNING: The value 00 in an outputs activation equation means that nothing at

all should be done. Thus, it should only be entered at the end of the equation. If

the value 00 is entered at the beginning of the equation, the CVMk2 will not make

the calculation or activate the corresponding output.

4.7.1.3. Digital inputs conguration

The card inputs are also congured in two different ways depending on whether the user

desires to congure the input as an incremental counter or a two-state logic input (ON/OFF).

size = 0000

Accordingly, the input is congured as a two-state input, ON/OFF. When the input is congured

as ON/OFF, it is not necessary to congure the next menu option, Dec. pos.

size ≠ 0000

When an input size other than zero is congured, this is congured as an incremental pulse

counter, which can have a maximum counter value of 10M. The value to enter is the multiplier

for each input pulse.

Dec. pos: Indicate the decimal positions that the corresponding input counter should

have.

The options available in the lower menu include:

Next(F2). This increases the input number from 1 to a maximum of 08 to access its

conguration. From the 08 input conguration screen, pressing F2 (Next) again

will take the user back to the 01 input conguration screen.

OUT (F1): Press this button to access the alarms conguration screen, Section 4.7.1.1.

To store the modied parameters in memory, press SET and conrm with OK (F4). To exit without

saving changes press ESC (F3).

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 151 152

Nessun commento

Circutor CVMk2 Series Manuale Utente Pagina 44