Circutor CVMk2 Series Manuale Utente Scaricare il pdf (Pagina 15)

CVM

INTRODUCTION

This manual provides information and warnings that the user should heed to guarantee that the

system operates safely and is kept in good conditions for safe use.

2. INSTALLATION

Verify the following upon receiving the instrument:

• The device meets specications in the order.

• The device was not damaged during transport.

• The instrument comes with the quick guide and/or the user's manuals.

2.1 ITEMS TO VERIFY UPON RECEPTION

In order to safely use the CVMk2, the personnel in charge of installing or

handling it must follow the standard safety guidelines and heed all warnings

provided in the instruction manual.

This analyzer should be installed and maintained by qualied personnel.

2.2 ASSEMBLY SITE

To guarantee its optimal operation, it is recommended to use the system at between -10 and

40 ºC with relative humidity between 5 and 95%, but with no condensation. Temperature range

according UL. In internal testing until 50 ºC

ENVIRONMENTAL CONDITIONS

The CVMk2 should be mounted in a distribution cabinet that protects the system from

environmental contamination such as oil, moisture, dust, corrosive vapours or other volatile

substances.

CONSIDERATIONS

The system can be installed in one of two basic ways:

• As a compact system in a distribution cabinet, installing at the panel.

• As a modular system, installing the display on the panel and the measuring

module on DIN 46277 (EN 50022) rail.

If the system is handled in a way contrary to the manufacturer's specications, it

may not be protected.

When it is likely that the system has lost its safety guards (due to visible

damages), it should be disconnected from the auxiliary power supply and the

input supplies. In this case, contact a qualied tech support.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 151 152

Nessun commento

Circutor CVMk2 Series Manuale Utente Pagina 15